機台性能
Machinery Function
01
機台結構之剛性、強度、精度、變形量…..等等依國家標準製造，兼具絕對的穩定性。
The firmness, strength,precision and others will base on the national standards for production, and it is equipped with excellent stability.
02
經由電腦自動控制下模連動式橈度補償。
With computer control it is equipped with sequencing turn-around degree compensation for molding.
03
軸，X軸，R軸皆有同步動作，也可獨自個別運作微動，舉例一次折壓可折雙邊不同角度跟不同尺寸。
Y, X, and R axis can be operated at the same, and micro-tuned operated individually, for instance, a press brake con conduct two sides of different angles and length.
CNC油壓折床介紹
軸配置位置圖 Axis layout Chart
Introduction of CNC hydraulic press brake
電腦同時控制多軸Y1. Y2. R1. R2. X1. X2. Z1. Z2....等
The computer is equipped with the function to control sveral axis (Y1, Y2, R1, R2, X1, X2, Z1, Z2….ect.)
FENG YANG
折床數位控制
Press brake control
Delem DA-69T
觸控3D圖形控制系統
Delem DA-69T Touch 3D Graphical Control
Delem DA-66T
觸控2D圖形控制系統
Delem DA-66T Touch 2D Graphical Control
Delem DA-58T
彩色2D圖形數位控制系統
Delem DA-58T Color 2D Graphical CNC System
Delem DA-53T
觸控彩色數位控制系統
Delem DA-53T Touch Color CNC System
刀模
Punches and Dies
多種刀形可供選擇，估價時請註明配備何種刀形。
Please note and check the above pictures of various punches and dies before you consider ordering your product. We can then estimate a price for you. We offer various shapes and sizes at different prices to meet your demands.
精準的電動撓度補償
Deflection Compensation Devices
安全防護裝置
Safety Guard System
機台左右側及背面裝有安全防護門保護人員安全
On the two sides of the machine,it is equipped with infrared protective shell as safety device to ensure the safety of working personnel.
左右側光閘皆有國家安全標準TS認證紅外線雷射安全光閘裝置
TS Certificated Safety Guard System
後定規總成
Backgauge Assembly
後定規總成
- 後定規行程680mm，配合時R軸使用時可增檔板距離可到1000mm。
- X軸及R軸採用精密滾珠螺桿配合精密線性滑軌+三菱伺服馬達，定位精準度高達±0.02mm。
- 快速移動時噪音值微小，每秒可達280mm以上。
Backgauge Assembly
- Stroke of backgauge is up to 680mm. The distance of stopper increases to 1000mm if it operates with R axis.
- Ball-screw X and R axes are driven by servo motor. Positioning accuracy is up to ±0.02mm.
- Quick movement is quite, maximun speed can be up to 280mm/sec.
後定規檔板圖型 Backgauge Assembly
※另有特殊後定規檔板可訂製
FYB-CNC 油壓折床規格
Specifications of CNC Hydraulic Press Brake
Specifications
Pressure Gauge
Specifications
Pressure Gauge
材料之板厚及曲的內側台徑決定的話，請參閱下表。
1. 由表可看出材料為公尺所需的壓力。
2. 折曲時所使用的下欄，之V幅(寬)
3. 折曲後所得之最小緣長度
If the board thickness and bend radius are determined, please use the table below as reference.
1. The pressure needed to bend the material (per meter) is listed in the table below.
2. The lower module that is used to bend the material, in V breadth (width)
3. The shortest perimeter after material is bended.
*本公司產品不斷研究改良，若規格有任何更改，恕不另行通知。
Under our continuous R&D for any change in specifications without prior notice.
